Element TV Won’t turn on But Blue Light is On [Fixed]

If you own an Element TV and the blue light is on but the TV won’t turn on, you’re not alone. This is a common problem that can have several underlying causes. In this blog post, we’ll explore the possible reasons for this issue and how to troubleshoot it.

Generally when an Element TV won’t turn but the blue light turns on or flashes that is likely because the mainboard has failed, which is the most common cause of failure in these sets. With only the blue light on may be a sign that the TV is receiving power, but the processor in the TV may have locked up, requiring a hard reset. If the hard reset does not work, the mainboard needs to be replaced.

Why an Element TV Not Turning on but the blue light comes on

Faulty mainboard: The most common cause for an element TV not turning on with a blue light coming on  in these sets is a faulty mainboard. This can prevent the TV from turning on and may require a replacement to be made to the set to fix the issue.

Power supply issues: If the power supply board is not providing enough power to the TV, it may not turn on. This could be due to a faulty power supply to the control board or a loose connection between the power cord and the TV.

Processor lock-up: Sometimes, the processor in the TV can simply lock up, preventing the TV from turning on. In this case, a hard reset may be able to fix the issue.

Read also: How to Fix Philips TV Not Turning Off

Troubleshooting Guide: Element TV Won’t Turn On but Blue Light is On

If you’re experiencing an issue where your Element TV won’t turn on, but the blue light is on, try these troubleshooting steps:

Perform a hard reset

1.  Disconnect the TV from power, 
2. Then press and hold the power button on the TV itself (not the remote) for 10 seconds and release.
3.  Plug the set back in and 
4. Check that the power cord is connected tight to the TV as well. 
5. Press power once and see if the set powers up normally.
6.  Try this procedure up to 2 times.

Replace control board

If the hard reset does not work, it indicates that the set’s Mainboard has failed and needs to be replaced.

Replacing the control board is relatively easy.:

To replace the Mainboard, you can purchase the part for your set at a cost of $35 from a site such as FTVParts.com, and replace it yourself with just a screwdriver and about a half hour of your time. Alternatively, you can take the set to a repair shop and expect to pay around $200 in parts and labor.

If you’d like to inquire on repairs or seek a second opinion, you can use a site like TV Repair Pros to locate a shop in your area.

Which is more cost effective, professional service or brand new unit?

If you’re not comfortable with replacing the control board yourself, then at a shop this is $200 parts and labor. This  is not typically not cost effective as a brand new 42″ LED Smart TV starts at around the same cost. 

Read also: How to Fix a Samsung TV Flashing Blue Screen

Final thoughts

We have seen in this troubleshooting guide the causes for  an Element TV not turning on when the blue light is on. For the tips we have provided, we  can identify and fix common issues such as a faulty power supply, damaged mainboard . 

By following the steps in this guide we can  diagnose this  problem and save on repair costs by identifying simple solutions before seeking professional help.