Samsung Soundbar Remote Not Working [Fixed]

If you’re reading this, chances are you’re having trouble with your Samsung soundbar remote. You press the buttons, but nothing happens. It’s frustrating, especially if you just got the soundbar and were looking forward to enjoying your favorite movies or music. But don’t worry – you’re not alone, and there are some easy steps you can take to try and fix the problem.


Reasons why the Samsung soundbar remote may not be working

Dead or improperly installed batteries

The most common reason why a Samsung soundbar remote may not work is because the batteries are low or not installed correctly. When you have a low battery, the remote won’t have sufficient power to work properly.

How to fix it

The first thing you should check if your Samsung soundbar remote isn’t working is the batteries. Make sure they are installed properly and have enough charge. Negative terminal (-) should go on the negative side and the positive terminal (+) should go on the positive side.  Try replacing the batteries with fresh ones and see if that solves the issue.

Read also: How to fix skullcandy left earbud not working

Resetting the remote

Sometimes, the remote may simply need to be reset. To do this, remove the batteries from the remote and press and hold any button for 30 seconds. This should drain any remaining power from the remote and reset it. Then, replace the batteries and try using the remote again.

Blocked IR sensor on the soundbar

Another reason why the remote may not work is if the IR sensor on the soundbar is blocked. The sensor is typically  located on the front of the soundbar and can sometimes get blocked by dust  or other materials.. 

How to fix this

 Use a soft, lint-free cloth to clean the sensor and remove any obstructions that may be blocking it. Try using the remote again after cleaning the sensor.

Using a universal remote as an alternative

If none of the above steps work, you can try using a universal remote as an alternative to control your soundbar. Make sure the remote is compatible with your soundbar.

Tips on how to prevent samsung soundbar remote Not working in Future

Regularly check the batteries

To avoid future issues with your Samsung soundbar remote, it’s a good idea to check the batteries regularly and replace them as needed. This can help prevent low batteries from causing the remote to stop working.

Keep the IR sensor clean

Cleaning the IR sensor on the soundbar can help ensure that the remote continues to work properly. Consider wiping down the sensor with a soft cloth every few weeks to remove any dust or other obstructions.

Use the remote properly

Make sure you’re using the remote properly and pointing it directly at the soundbar’s IR sensor. If you’re too far away or not pointing the remote in the right direction, it may not work.

Avoid obstructions

Make sure there are no obstructions blocking the line of sight between the remote and the soundbar’s IR sensor. This can include furniture, other electronics, or even a person standing in the way.

Similar Posts